Troubleshooting - Ducati Pro-I Evo DU-MO-210001 Manual Del Usuario

Errore
The motor is not running
The drive wheel does not turn
The motor stops while it is running
After charging it, the item does not
switch on or it switches off after
a few km
The battery does not charge or the
item does not switch on
Pro-I Evo
Error code Indications
E.1 Engine malfunction
E.2 Control unit signal error
E.3 Accelerator lever malfunction
E.4 Control unit MOS malfunction
E.5 Phase / current error
E.6 Average current malfunction
E.7 Battery voltage error
E.8 Brake lever malfunction
12.

Troubleshooting

Causa
Electrical issue, error code
present
Problems with the brakes
Motor is blocked
Motor overheating
Presence of error code
Damaged battery
Connection problems
The battery is not connected
(models with removable battery)
The battery is depleted
Damaged battery
Problems with the battery
charger
23
Soluzione
Request technical assistanc
Adjust the brakes; if the problem persists,
request technical assistance
Check that the wheel is properly tightened,
check that the wheel turns without starting
the vehicle. If the problem persists, request
technical assistance
Stop the vehicle and wait for it to cool
Request technical assis
Request technical assistance
Request technical assistance
Check that the power connector is connected.
Charge the battery to 100%
Request technical assistance
Replace the battery charger
Pro-II Plus, Pro-II Evo, Pro-III
Error Code
E01
E02
E03
E04
E05
E06
E07
E08
E09
E11
E12
E13
Indications
Overcurrent protection
Low voltage prote
High voltage protection
Drive wheel guard
Controller MOS Fault (up)
Controller MOS Fault (down)
Controller general fault
Overheating protection
Accelerator lever malfunction
Headlight malfunction
Control unit signal error
On/off button malfun