Publicidad
Idiomas disponibles
Idiomas disponibles
9.3
Duty cycle
The duty cycle is a legally regulated limit of the transmission time of de-
vices in the 868 MHz range. The aim of this regulation is to safeguard the
operation of all devices working in the 868 MHz range.
In the 868 MHz frequency range we use, the maximum transmission time
of any device is 1% of an hour (i.e. 36 seconds in an hour). Devices must
cease transmission when they reach the 1% limit until this time restriction
ends. Homematic IP devices are designed and produced with 100% con-
formity to this regulation.
During normal operation, the duty cycle is not usually reached. How-
ever, repeated and radio-intensive pairing processes mean that it may
be reached in isolated instances during start-up or initial installation of a
system. If the duty cycle is exceeded, this is indicated by one long flash of
the device LED (D) , and it may have the effect of the device temporarily
working incorrectly. The device will start working correctly again after a
short period (max. 1 hour).
9.4
Error codes and flashing sequences
Flashing code/
display
F1
F2
F3
Battery symbol
( )
Meaning
Valve drive sluggish
Actuating range too
wide
Adjustment range too
small
Battery voltage low
Solution
Please check whether the
valve pin is stuck.
Check the radiator thermo-
stat is mounted
securely
Please check whether the
valve pin is stuck.
Replace the batteries of the
device (see see „8 Chang-
ing the batteries" on page
61).
Troubleshooting
63
Publicidad
