Publicidad
Idiomas disponibles
Idiomas disponibles
V-2-6
Navigation lights
Press this button to switch on the navigation
lights. There are 3 positions.
Off
White light position
White light, red light, and green light
position.
V-2-7
Wiring an accessory
1º/ Choose a free fuse location.
2º/ Connect the power supply of your accessory to the terminal corresponding to this slot using a
6mm female tab or eye connector.
3º/ If you have to add cable for the connection, use cable with a cross-section of at least 1.5mm² that
complies with "marine" standards (UL1426 or SAE J378 or SAE J1127 or SAE J1128 or more generally
meeting ABYC and/or EC standards).
4º/ Connect the earth cable of your accessory to the ground terminal strip using a Ø5 "ring terminal"
(same comment as for the cable above).
5º/ Insert an ATO type fuse with a max current of 15A and greater than the load current of your
device.
Red wire
Page 40 / 63
1
2
Red wire
Th
re
ad
Direct wiring
Wiring with switch
3
Issue 4
Publicidad
