Descargar Imprimir esta página

ring RSCP5024 Manual página 2

Publicidad

BATTERY CHARGE PRO
50A 12V / 24V
Warnings*
DANGER! BE AWARE, LEAD-ACID BATTERIES GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS VERY IMPORTANT TO READ
AND FOLLOW THESE INSTRUCTIONS CAREFULLY, EACH TIME YOU USE THE CHARGING
EQUIPMENT.
WARNING! Modern vehicles contain extensive electronic systems. You are required to check
with the vehicle manufacturer, for any specific instructions regarding the use of this type of equip-
ment on each vehicle.
Charge in a well-ventilated area.
DO NOT operate near flammable liquids or gases.
DO NOT touch the clamps together or allow to touch the chassis.
DO NOT connect the clamps via another metallic object.
DO NOT cross connect power leads from charger to battery. Ensure positive (+/RED)
is connected to positive and negative (-/BLACK) is connected to negative.
DO NOT pull the cables or clamps from the battery terminals.
DO NOT pull or carry the charger by the power cable.
DO NOT pull the plug from the socket by the cable.
DO NOT use worn or damaged cables, plugs or clamps. Any faulty item should be
immediately repaired or replaced by a qualified technician.
DO NOT use the charger for a task for which it is not designed.
DO NOT cover or obstruct the charger ventilation louvres or fan.
DO NOT at the same time charge batteries of different capacities or discharge levels.
2

Publicidad

loading

Este manual también es adecuado para:

Battery charge pro 30a 12vBattery charge pro 30a 24v