SOMFY 1875141 Manual página 49

External wall
movement
detector
Thank you for purchasing an external wall movement detector for your Somfy alarm system.
Do not install or use the product outdoors.
■
If the screws and anchors provided are not suitable for the material of the wall, obtain the correct
■
type of screws and anchors. Failure to do this may result in the product falling off the wall.
Do not subject the product to impacts or drops, or expose it to flammable materials or a heat source,
■
or to moisture or splashing liquid, and do not immerse it in liquid.
Do not use abrasive products or solvents to clean it.
■
This external wall movement detector is compatible with the following Somfy central units/
phone dialers:
PROTEXIAL IO (2010 and subsequent versions)
■
Read this manual totally to install it.
HOME KEEPER
■
To install it:
In connected mode, recommended by Somfy, that means with the central unit is linked
−
to Internet, the installation of this detector must be done with a smartphone thanks to the
free Home Keeper PRO application. Let follow the step by step intuitive guide, which allows
you to install this detector quickly, to personnalise the settings and the life modes, and to
test the installation.
In non connected mode, that means with the settings done thanks to the Home Keeper
−
LCD keypad, read this manual without taking into account the chapter "Affect a zone to the
external wall movement detector" in pages 4 and 5.
The external wall movement detector dual-technology will be active in Night mode (outdoor
and peripheral protection) and in ON total mode.
We recommend that you:
Read this manual carefully and make absolutely sure that you follow all the mounting and operating
■
instructions in order to get the best possible use from your Somfy alarm system.
Keep this manual in a safe place for the entire lifetime of the product.
■