Opening The Product; Installation; Inserting The Batteries; Storing The External Wall Movement Detector In The Central Unit/Phone Dialer - SOMFY 1875141 Manual

Opening the product

1 Remove the fixing screw (c)
and take off the cover. Do not
press on the lenses.

Installation

Inserting the batteries

Open the battery compartment.
Insert the 3 alkaline batteries provided in the
battery compartment.
Make sure the batteries are inserted the
right way round (+/-). Make sure that
the ends of the batteries are touching
the battery contacts.

Storing the external wall movement detector in the central unit/phone dialer

Setting the central unit/phone dialer to storage mode:
If your system is already operational, and the central unit/phone dialer is already installed, and you want to add
a detector. You can enter storage mode in 3 ways:
By going to the "Device list" screen in the Installer menu and pressing
■
installation manual.
Using the LCD keypad, and entering menu + installer code + 753 (open memory menu), see the alarm system
■
installation manual.
Using a previously stored remote control, and pressing "OFF" until the indicator goes out. You will hear a beep
■
on the central unit.
Storing the detector:
Reminder: maximum of 50 devices per central unit/phone dialer.
Press the button inside the external wall movement detector:
BEEP
You will hear a on the central unit/phone dialer.
The external wall movement detector is stored in the central
unit/phone dialer.
52
2 Remove the 2 fixing screws
(b) from the base. Do not
touch the mirrors.
Copyright © 2018 Somfy Activités SA. All rights reserved.
3 Remove the rear mount:
Separate it from the base
1
Slide it downwards
2
2
1
, see the alarm system
Opening