Descargar Imprimir esta página

Aludesign Climbing Technology TRUCK Guia De Inicio Rapido página 3

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 7
The instruction manual for this device consists of general and specific instructions,
both must be carefully read and understood before use. Attention! This leaflet
shows the specific instruction only.
SPECIFIC INSTRUCTIONS TRUCK / HAMMER LODGE.
This note contains the information necessary for correct installation and correct use
of the following accessories: gear hook or hammer holder for your harness (Fig. 1).
1) INSTRUCTIONS FOR USE.
These accessories are only intended for hanging and carrying equipment on your
harness. They must never be used for belaying your partner or yourself, nor for rope
manoeuvrers. Maximum working load: 5 kg. Attention! Before using the device on
which the accessory will be installed, make sure you have read and understood
the general and specific instructions that must accompany each device. Atten-
tion! These accessories are not Personal Protective Equipment (PPE) and are not
designed to support the user's weight (Fig.2.3-4.3). Attention! An error can have
extremely serious consequences, any method of assembly and use other than what
is indicated is to be considered prohibited.
1.1 - Installation. Insert the carabiner into the dedicated slot on the harness (Fig.
2.1-4.1) and if necessary secure it using the rubber support provided. If the harness
does not have a dedicated slot, the carabiner can be fixed to it using the rubber
support supplied (Fig. 2.2-4.2).
1.2 - Truck. This accessory allows you to comfortably carry and manage the equip-
ment on your harness (ice screws, rock pitons and nuts etc.), allowing for easy
hooking and unhooking. The curvature of the upper part allows you to place the
desired equipment there in order to make selecting it easier (Fig. 3).
1.3 - Hammer Lodge. This accessory allows you to conveniently hang the hammer
or other tools on your harness. With a simple movement the lever remains open
allowing for rapid hooking and unhooking of the hammer (Fig. 5).
Climbing Technology by Aludesign S.p.A. via Torchio 22
24034 Cisano B.sco BG ITALY
ENGLISH
www.climbingtechnology.com
IST46-6V519CT_rev.0 02-23
3/25

Publicidad

loading

Este manual también es adecuado para:

Climbing technology hammer lodge6v5196v520