Publicidad
Idiomas disponibles
Idiomas disponibles
dormakaba Montageanleitung
1
Information about this document
1.1
Contents and purpose
This manual describes the mounting of the profile kit
for wall pockets in connection with a MUTO Comfort
Pocket L 80 sliding door. The mounting is shown using
the example of a door which opens outwards to the
right. The mounting for a door that opens outwards
to the left must be mirror-inverted accordingly.
1.2
Target group
The target group of these mounting instructions are
drywall installers and interior fitters as well as
qualified
personnel who have been specially trained in glazing
installation.
1.3
Other applicable documents
• MUTO Comfort L 80 mounting instructions
• MUTO Comfort Pocket L 80 mounting instructions
• Maintenance manual for manual sliding doors
• Documentation for accessories used
1.4
Document storage
This manual must be kept during the service life of the
product and must be passed on with the
product.
1.5
Abbreviations
MCE
Main closing edge
SCE
Secondary closing edge
DH
Passage height
DB
Passage width
1.6
Symbols used
Follow the written instructions.
Position numbers
1
2
A
1.
2.
Action steps
Main closing edge
MUTO Comfort L 80 Pocket
2
2.1
• The profile kit for wall pockets is only suitable for
the sliding door MUTO Comfort Pocket L 80.
2.2
• The supporting structure/ceiling must be
permanently load-bearing, flat and vertically
aligned (max. tolerance: 2 mm per meter).
• The fixing materials must be suitable for the
supporting structure/ceiling and for the door panel
weight. Refer to the technical instructions for the
fixing materials.
WN 060329 45532
Information about this document
Safety
CAUTION
Risk of injury due to inadequate mounting.
The fixing materials must comply with the
requirements for the supporting structure/
ceiling and the weight of the door panel.
• Refer to the technical instructions for the
fixing materials.
CAUTION
Risk of injury by crushing.
Finger crushing may occur during mounting.
• Wear protective gloves.
Intended use
Requirements for the supporting
structure/ceiling and fixing materials
EN
2021-06
5
Publicidad
