Rointe GIZA SRT TGISN50B080 Manual De Instalacion Y Uso página 11

An installation kit is included in the packaging. Follow the instructions below:
1. Select the right place on the wall.
2. Place the template on the wall, making small marks where the holes are to be located.
3. Remove the template and make the holes.
4. Insert the plugs into the holes made.
5. Screw the plastic anchor piece to the wall with the screw Ø 5.5 x 50 mm.
6. Screw the two towel rail fastening pieces and the plastic fixing piece to the horizontal
tube of the towel rail as shown in Figure 1 with the Ø 6 x 35 mm screw.
7. Insert the assembly from point 6 into the plastic anchoring piece and fasten with the
Ø 2.9 x 9.5 mm grub screw.
8. Fit the trim on the cable clamp.
Nº.
1 Plug Ø 10 x 45 mm
2 Fixed plastic support
3 Screw Ø 5.5 x 50 mm
4 Plastic bracket with nut M6
5 Plastic head support
6 Screw Ø 6 x 35 mm
7 Plastic support cover
8 Locking screw Ø 2.9 x 9.5 mm
9 Product
ITEM
GIZA SRT ELECTRIC TOWEL RAIL
EN
11