Descargar Imprimir esta página

General Safety Warning - HOMCOM 820-294V90 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT INSTRUCTIONS – OPERATING MANUAL
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE
OR MAINTAIN THE PRODUCTS DESCRIBED PROTECT YOURSELF AND
OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY
WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

GENERAL SAFETY WARNING:

1. The heater should be hung on the wall and make the wind outlet down or be
placed on flat appliance. You must not place it precipitately or tipsily.
2. Use only the voltage specified on the rating plate of the heater.
3. The heater must not be located immediately below a socket-outlet.
4. Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the
appliance overheat and become a fire risk.
5. Do not block air inlets or outlets in any manner. Check the openings from time to
time for accumulated dust.
6. Do not place the appliance close to a radiant heat source.
7. Do not operate in areas where gasoline, paint or other flammable liquids are
used or stored.
8. Do not use the appliance to dry clothes.
9. Do not insert or allow foreign objects to enter any ventilation or exhaust
opening, as this may cause an electric shock, fire or damage to the appliance.
10.
Do not operate any appliance with a damaged cord or after the appliance
malfunctions or has been dropped or damaged in any manner. Return to a qualified
electrical person for examination, electrical or mechanical adjustment, service or
repair.
11. This appliance is intended for household use only and not for commercial or
industrial use.
12.
Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or injury.
13.
The most common cause of overheating is deposits of dust or fluff in the
appliance. Ensure these deposits are removed regularly by unplugging the
appliance and vacuum cleaning air vent.
14.
Do not use abrasive cleaning products on this appliance. Clean with a damp
cloth (hot wet) rinsed in hot soapy water only. Always unconnected from the mains
supply before cleaning.
15.
The appliance heats up slightly when in use. To avoid burns, do not let bare
skin touch hot surfaces.
16.
The use of an extension cord with this appliance is not recommended.
17.
Do not allow cord to come in contact with heated surfaces during operation.
18.
If the supply cord is damaged, it must be replaced by the manufacturer its
service agent or similarly qualified persons in order to avoid a hazard.
19.
If the heater needs repair, please ask for special person or our company
authorized maintenance department.
20.
Do not use this appliance outdoors, or on wet surfaces.
21.
The heater is to be installed so that switches and other controls cannot be
touched by a person under the absence of supervision (This appliance is without
plug, do not touch the cord directly).
22.
Heater must be installed at least 0.2 m below the ceiling.
23.
The heater should not be installed close to curtains and other combustible
materials.
24.
If the motor is not working properly, please stop it immediately, then check it
by the qualified persons.
1

Publicidad

loading