Technical Caracteristics - aldes ALANA Manual De Instalación

3. SERVICING
3

4. TECHNICAL CARACTERISTICS

Models
Material
Purified surface
Max airflow
Number of speeds
Sound pressure level
(dB(A)) 2 m away
Consumption (W)
4 5
6
Wall or standing version
Aluminium body and beech stand
20 m
2
100 m /h
3
Automatic mode during the day,
switching to night mode if lack of
brightness.
Manual mode (5 speeds): night-
time, 25, 50, 75 and 100 m /h
3
(boost)
< 30
2.2 to 6.4 V
The button has turned orange? This is the signal to clean Alana™
For optimum use, clean the equipment filters once a year with
the brush supplied:
Hold the button down for 3 seconds to switch off the
1
equipment.
Unhook the equipment from the wall.
2
Remove the top end, the bottom end and the brush from
3
inside the device.
Stand the equipment upright on a table so that you can
4
clean it easily.
Brush between the plates to remove the dust from the
5
equipment
Twist a dry cloth into a point and move it around in each of
6
the ionisers to clean them.
Refit and hook on the equipment.
7
Once it is reconnected, hold the button down for 3 seconds
8
to reset the equipment. A blinking blue light indicates that
servicing is complete.
It can be easier and better to
clean the equipment by applying
methylated spirits to the brush,
but this is not necessary to keep
the unit in good working order.
Dimensions L x H x D (cm)
Weight (kg)
Power supply
Secure wall mounting
ON/OFF and operating
speed indicator
Cleaning indicator
Accessory included
Certification
1 8
15 x 30 x 15 cm (34 cm with feet)
< 3
110-120/220-240 V AC 50/60 Hz
Yes
Yes
Yes
Brush for cleaning the filter
CE, NF B44-200, NF EN 16846-1
EN
7