USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
FAN SPEED SELECTION
Press until desired speed lights up.
Sleep
mode is for energy-saving
comfort during the night. When
activated, the fan speed will run on
medium speed for 30 minutes and
gradually reduce to Low speed until
the unit is manually switched OFF.
2.0A USB CHARGE PORT
Plug in to power or charge USB
devices like your smartphone or
tablet.
IMPORTANT: Different devices draw
different amounts of power. Devices
such as tablets may require more
power and longer charging times for a
full recharge.
COOLER LOCATION
Position the ZETA™ Air Cooler on a flat and stable surface.
Open a window or door for adequate cross-ventilation in Cooling Mode. The maximum cooling effect is felt when
a person is near the flow of air coming out of the Cooler.
ZETA™ produces moisture and can be used to humidify dry air. To be used for humidification windows and doors
should be closed.
IMPORTANT: The evaporative air cooler is not an air conditioner as it does not use a compressor or refrigerant
gas. It should not be expected to cool as efficiently as a refrigerated air conditioner.
EN
3
POWER ON/OFF
Press to turn ON/OFF the unit.
When turned ON, the fan speed will
automatically start at Medium speed
until manually adjusted to another
speed. If you turn OFF the unit
without unplugging the electrical
plug, the unit will restar t using
previous fan settings the next time
you turn it on again. If the unit was
unplugged from the electrical outlet,
previous fan settings will be lost
and the unit will turn on at medium
speed.
COOLING MODE
Turns On/Off evaporative cooling.
When light is ON, the water pump
turns on and evaporative cooling is
activated. You will feel the cooler air
after the Honeycomb Cooling Media
is completely wet. When light is OFF,
the unit functions as a normal fan
without evaporative cooling.
HUMIDIFICATION
You can use the unit as a Humidifier
by keeping Cooling Mode on and
windows/doors closed to collect
moisture in a dry room.