Function Buttons - Honeywell CS10XE Serie Manual De Instrucciones

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS

POWER
Press the POWER button to turn the unit on. The cooler will start automatically at medium speed.
After a few seconds the speed will switch to low. To turn the unit off, press the button again.
M
H L
SPEED
S
Press the SPEED button repeatedly to change the speed between H - M - L - S*.
When the SLEEP mode is selected, the fan will run on High for one hour, then Medium for the second
hour and on Low speed from the third hour onwards until you switch off the unit.
0.5
1 4
TIMER
2
Press the TIMER button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to 7.5
hours of use.
SWING
Press the SWING button until
The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change
vertical air flow.
COOL
Press the COOL button until
cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling
Media is completely wet.
WARNING: Please ensure sufficient water is in the water tank otherwise you may hear a Low Water
Alarm and the cooler will start in a Fan only mode without evaporative cooling.
is illuminated on the display.
is illuminated on the display screen. This activates evaporative
EN 3
Louver
Movement
*Applicable for models with Sleep feature only.