Setup And Installation - Cameo LUXIS FC Manual De Usuario

SETUP AND INSTALLATION

HAZARD: Overhead mounting requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk of incorrectly mounted and secured devices coming loose and falling
down. This can cause serious injury or death.
Thanks to its convenient double bracket, the lamp can be positioned in a suitable loca-
tion on a level surface. Rubber feet prevent scratching of surfaces and ensure stability
(A). An optional Omega bracket can be attached to the U-bracket for truss mounting (B). Alternati-
vely, the integrated 16 mm TV spigot SPIN16 can be used for truss mounting (C). Installation on a
truss is possible with a truss clamp. Suitable truss clamps are optionally available.
Loosen the two handle screws on the sides of the spotlight (D) to adjust the beam direction in the
vertical plane and tighten the two handle screws again after adjustment.
Always take care to ensure firm connections and secure the spotlight by attaching a suitable safe-
ty cable to the securing lug on the back of the spotlight.
28
C
A A
B
D
A A