Pairing - Establishing A Plc Connection - Devolo MAGIC WiFi next Manual

13 Introduction
b
Efficiency – The integrated PowerSave mode
reduces energy consumption automatically at
low data traffic.
b
The 2 gigabit network connectors on the
devolo Magic 2 WiFi next
stationary network devices—such as a game
console, TV or media receiver—to your Internet
access point over the Powerline network (e.g.
Internet router).
b
Its integrated electrical socket can be used
like a normal wall socket to supply power to an
additional network device or a power strip.
The devolo Magic 2 WiFi next features
b
An integrated electrical socket,
b
A PLC button with LED status display,
b
A Wi-Fi button with LED status display,
b
Four internal Wi-Fi antennas,
b
Two gigabit network connectors
b
A reset button (next to the network connec-
tors).
The LED status displays can be disabled. You
can find more information about this in
Chapter 4 Network configuration or onli-
ne at www.devolo.global/devolo-cockpit.
devolo Magic 2 WiFi next
let you connect
Fig. 3 Network connections
2.3 Pairing – Establishing a PLC
devolo Magic adapters that are in the factory de-
fault condition, i.e. have been recently purchased
or successfully reset (see Chapter 3.6 Removing
the devolo Magic adapter from a PLC network),
automatically start to attempt to pair (establish a
PLC connection) with anotherdevolo Magic adap-
ter when reconnected to the mains supply.
connection