Starter Kit - Automatic Set-Up For A New Devolo Magic Plc Network; Addition - Expanding An Existing Plc Network By Adding Another - Devolo MAGIC WiFi next Manual

3.4.1Starter Kit – Automatic set-up for a
new devolo Magic PLC network
1
Connect one devolo Magic 2 LAN to your Inter-
net access device's network connection (e.g.
your Internet router).
CAUTION! Tripping hazard
Lay the cable in a barrier-free manner and
ensure that the electrical socket and the
connected network devices are easily ac-
cessible
2
Plug both devolo Magic adapters into available
power sockets within 3 minutes. As soon as the
LEDs on both adapters flash white at regular
intervals of 0.5 sec., they are ready to operate
and automatically start the process of establis-
hing an encrypted connection to each other
(see Chapter 2.3.1 Reading the PLC indicator
light).
If the LEDs on both devolo Magic adapters
light up in white, then your devolo Magic
network has been set up according to your
individual specifications and is protected
from unauthorised access.
3.4.2 Addition – Expanding an existing
PLC network by adding another
devolo Magic 2 WiFi next
1
Plug the devolo Magic 2 WiFi next into an
available power socket. As soon as the LED
flashes white at
0.5 seconds, the adapter is ready to operate
but not yet integrated into a devolo Magic
network (see Chapter 2.3.1 Reading the PLC
indicator light).
Pairing – Establishing a PLC connection
Before you can
devolo Magic 2 WiFi next
devolo Magic network, first you have to
connect it to your existing devolo Magic ad-
apters as a network. This is accomplished by
using a shared password:
2
Within 3 minutes, press the PLC button on a
devolo Magic adapter
devolo Magic network for approximately 1 sec.
The new devolo Magic adapter pairs auto-
matically so no button needs to be pressed.
The LED of this adapter now also flashes
white.
devolo Magic 2 WiFi next
Initial use 24
regular intervals of
use the new
in your
in your existing