Intended Use; Using For The First Time; Electrical Connection - Exquisit MS3003 wei Manual De Instrucciones

EN

7.3 Intended use

The appliance is designed exclusively for
chopping and mixing food. The hand
blender is intended exclusively for use in
private households and is not suitable for
commercial use.
Use the hand blender only as described
in this instruction manual. Any other
form of use does not constitute an
intended use and can result in material
damage or even personal injury.
The manufacturer or dealer accepts no
liability for damage or injury resulting
from improper use or use for other than
the intended purpose.

8 Using for the first time

WARNING
The attachments and the blades are very
sharp! Be very careful with these parts!
There is a risk of injury!
• Do not get the appliance wet.
• Switch off the appliance and
disconnect it from the mains
power supply before replacing
accessories or additional parts.
• Disconnect the appliance from the
mains power supply when
assembling or disassembling.
WARNING
• Only have a defective appliance
repaired by an authorised
specialist. To avoid hazards, have
a defective mains power cable
replaced only by the
manufacturer, our customer
service department or a similarly
qualified person with an equivalent
cable.
• Children must not use the
appliance. They could get hurt by
the blades.
• Keep children away from the
appliance.
• Children must not be allowed to
play with the appliance.
Page | 14

Electrical connection

Check that the mains voltage you want
to use matches that of the appliance.
You will find the information on this on
the type plate.
Before initial use
The appliance is not suitable for hard
foods such as ice cubes, nutmeg or large
pieces of blocks of chocolate. This can
damage the blade!
1. Remove all parts from the
packaging and check for damage.
2. Clean all parts before initial use.
"Cleaning and maintenance"
section
Attach the blending rod
1. Place the appliance on the
blending rod (6).
2. Turn the appliance clockwise as
far as it will go.
✓ The markings on the appliance
and the blending rod should now
be aligned. If this is the case, the
blending rod is correctly locked.
Removing the blending rod
Remove by a briefly rotating anti-
clockwise.
Speed buttons
Level 1:
To reach the minimum speed. It cannot
be regulated.
Level 2:
To reach the maximum speed. It cannot
be regulated.