Publicidad
Idiomas disponibles
Idiomas disponibles
5.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
6.
Do not operate a power tool in a damp location.
PERSONAL SAFETY
1.
Use personal protective equipment.
2.
Avoid accidental start. Make sure that the switch is in the OFF position when connecting the power
supply and/or the battery pack
3.
Remove all adjustment keys or wrenches before the power tool is switched on.
4.
Do not overreach...
5.
Use devices with provided connections
NOTICES FOR USING THE TOOLS
1.
Do not abuse the power tool,use appropriate power tool for your application.
2.
Do not use the tool if the switch cannot work.It is dangerous if the switch cannot control the power
tool,and this tool should be repaired.
3.
Unplug the tool and/or disconnect the battery pack from the tool before any adjusti ng,
4.
Store the power tools out of the reach of children and do not allow those who are not familiar with the
power tool or who do not understand these instructions to operate the power tool.
NOTICES FOR USING THE BATTERY TOOLS
1.
Ensure that the switch is in OFF position before inserting the battery pack.
2.
Only use the charger specified by the manufacturer.
3.
Use power tools only with specifically designated battery packs.
4.
When battery pack is not in use,keep it away from other metal objects that can make a connection from
one terminal to another.
SERVICE
Have your power tool serviced by a qualified repair person using only identical replace ment parts.
1.3 Special safety instructions
1.
Do not remove the front cover at the time of operation do not touch the tying mouth when the equip-
ment is operating, any negligence may cause personal injury.
2.
After tying action is completed, hold the handle to move the tying machine ,
3.
Do not use the tying machine in the rain or the strong magnetic field environment.
4.
The product is designed to tie grape vines and other branches within the effective range of 25MM maxi-
mum diameter. Don' t use it in all kinds of tying work exceeding the range of 25MM maximum diameter.
The excess of this range would damage the tying machine.
34
Publicidad
