Publicidad
Idiomas disponibles
Idiomas disponibles
2. Product overview
2.1 Intended purpose
The tool is designed for tying the vines or branches. The operator or the user shall assume full responsibility
for the harm to others or any property damage to others caused by any accident occuring during the use.
Bellota shall not be liable for any damage caused by non-normal or improper use.
2.2 Operating instructions
1.
Switch the power ON, the tying machine is in working state,start working after pulling the trigger. If after
long-term use the tying machine stops working please check LED indicator, if it is red, it is under-voltage
protection please charge as soon as possible.
2.
To save energy ensure that the tying machine has the longest service life ,don't overload the machine,
don't use it to tie branches exceeding 25mm.
3.
ln the process of tying, if the tying is not successful, please switch off power.
4.
If the tying fails to be successful for several times, please switch the power of for inspection. Open
front cover and pressing plate, check wire at inlet and in the whole feeding track to see if there is any
knotted accumulated, and jamming phenomenon, and clear up timely in case of any abnormity. In the
process of tying, if the tying stops on half way,the feeding hook cannot retract and the tying machine is
stuck on branches and cannot be lifted up, please switch the power off ,then lift up feeding hook with
hand, and take off the tying machine
2.3 Included in the package
1.
Tying Machine
2.
Lithium Battery
3.
Battery Charger
4.
Tool Kit
5.
Tying Wire
36
Publicidad
