Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Do not attempt to remove the stuck feeding hook or t ying wire before turning off the power.
6.
Tying work must be finished when feeding hook and wire-outgoing track can stretch out and retract
smoothly and there is no interference of other foreign matters. Before starting the work of tying, please
check objects hidden in grave vines or branches.
7.
Do not use the tool near any flammable liquids or gases.
8.
Feeding system must be checked and cleaned frequently.
9.
Do not attempt to repair the tool yourself, unless you have been trained.
1.4 Special safety instructions for battery tool
1.
Make sure the battery switch is OFF before inserting the power line of the tying machine into the battery
2.
As the charger is only for indoor usage,the battery shall be charged in a dry and ventilated place indoor.
Dot not cover the charger or the battery
3.
Do not put the battery under strong light for a long time. Do not place the battery on hot surface. Heat
will damage the battery and may cause explosion.
4.
Please ensure that the high-temperature battery is fully cooled before charging.
1.5 Correct use of the charger
1.
The battery can only be charged by the provided charger.
2.
Always check the charger,wire and plug before every use
3.
The charger's socket must be grounded
4.
Disconnect the charger from the power supply before switching on or off the conne ction among the
battery / power tool / device.
5.
Keep the charger clean and away from the damp environment and rain. Do not use the charger out-
doors. The entry of dirt or water will increase the risk of electric shock. 6).The charger can only be used
to charge the original battery
Warning ! The power tool will produce electromagnetic fields when in use. This magnetic field may
damage the function of medical implants under certain circumstances.
35
Publicidad
