Samsung The Freestyle SP-LSP3BLA Manual Del Usuario página 4

Providing proper ventilation for your Projector
When you install your Projector, maintain a distance
of at least 4 inches (10 cm) between the Projector
and other objects (walls, cabinet sides, etc.) to
ensure proper ventilation. Failing to maintain proper
ventilation may result in a fire or a problem with
the product caused by an increase in its internal
temperature.
Operation
• Move the product by holding the body. Do not hold
the Lens Cap.
• This apparatus uses batteries. In your community,
there might be environmental regulations that
require you to dispose of these batteries properly.
Please contact your local authorities for disposal or
recycling information.
• Store the accessories (remote control, batteries, or
etc.) in a location safely out of the reach of children.
• When you need to turn off the Projector
completely, wait until the fan stops completely so
that the Projector can cool down completely.
• Do not dispose of remote control or batteries in
a fire.
• Do not short-circuit, disassemble, or overheat the
batteries.
English - 4
• CAUTION: There is danger of an explosion if you
replace the batteries used in the remote with the
wrong type of battery. Replace only with the same
or equivalent type.
• WARNING - TO PREVENT THE SPREAD
OF FIRE, KEEP CANDLES AND OTHER
ITEMS WITH OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.
• Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact a
Samsung service center.
Caring for the Projector
• To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product with
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergents. These
chemicals can damage the appearance of the
Projector or erase the printing on the product.
• The exterior of the Projector can get scratched
during cleaning. Be sure to wipe the exterior
carefully using a soft cloth to prevent scratches.
• Do not spray water or any liquid directly onto the
Projector. Any liquid that goes into the product may
cause a failure, fire, or electric shock.