Initial Setup; Troubleshooting And Maintenance - Samsung The Freestyle SP-LSP3BLA Manual Del Usuario

03 Initial Setup

When you turn on your Projector for the first time,
it immediately starts the Initial Setup. Follow the
instructions displayed on the screen and configure
the Projector's basic settings to suit your viewing
environment.
04 Troubleshooting and
Maintenance
Troubleshooting
For more information, see "Troubleshooting" in the
e-Manual.
> Menu > Settings > Support > Open e-Manual
> Troubleshooting
If none of the troubleshooting tips apply, please visit
"www.samsung.com" and click Support or contact the
Samsung service center.
• To keep your Projector in optimum condition,
upgrade to the latest software. (
Settings > Support > Software Update).
The Projector won't turn on.
• Make sure that the power cord is securely plugged
in to the Projector and the wall outlet.
• Make sure that the wall outlet is working and the
remote control sensor of the Projector is lit and
glowing a solid white.
• Try pressing the Power button of the Projector to
make sure that the problem is not with the remote
control. If the Projector turns on, refer to "The
remote control does not work."
The remote control does not work.
• Check if the remote control sensor of the Projector
blinks when you press the
control.
– When the remote's battery is discharged,
charge the battery using the USB charging port
(C-type).
• Try pointing the remote directly at the Projector
from 5 ft. to 6 ft. (1.5-1.8 m) away.
• Make sure to pair the remote to the Projector.
> Menu >
button on the remote
English - 9