Operation - Tineco PURE ONE S15 Serie Manual De Uso

OPERATION

Preparing for Use
Note:
• Before the first use, please charge the
appliance (see "Charging the Battery") for
about 5.5 hours in an area where the ambient
temperature is between 39.2°F (4°C) and 104°F
(40°C).
• Select an accessory and attach it to the
appliance before use (see "Accessories").
1.Press the button to activate the suction.
Press it again to turn off the appliance.
Fig.D-1
2.The appliance will start in AUTO mode by
default. Press the
AUTO
MAX
AUTO and MAX mode.
Fig.D-2
3.Place the appliance and attachments on the
charging dock for convenient storage after use.
Fig.D-3
Cleaning Mode Selection
AUTO Mode
• In AUTO mode, the power indicator and
the color of dust monitoring loop change
according to the amount of dust detected.
• A red dust monitoring loop indicates more dust
is detected whereas a blue loop indicates less
is detected. This mode automatically provides
the best cleaning solution.
Fig.D-4
MAX Mode
• In AUTO mode, press the
MAX mode.
• In MAX mode, the iLoop only displays the dirty
amount, and the suction power keeps at the
maximum.
Fig.D-5
Note:
Keep sharp objects away from the digital display
screen to avoid scratches and scrapes.
button to switch between
button to enter
AUTO
MAX
Emptying the Dustbin
1.With the power off, push down the dust empty
tab to clean the dustbin. If too much dust
causes a blockage, press the release button on
the dustbin and empty the contents.
Fig.D-6
2.Close and click the dustbin flap back into
place.
Fig.D-7
Charging the Battery
1.Plug the adaptor into the charging port at the
bottom of the dock.
Fig.D-8
2.Place the appliance on the charging dock and
plug the adaptor into a wall outlet.
Fig.D-9
Warning:
• Only use the Tineco-provided adaptor to
charge the appliance.
• To avoid trip hazards, please place the
appliance securely on the charging dock, near
a wall during charging.
• During long periods of not being used, store
the appliance in a cool, dry place. Ensure the
battery is fully charged every 3 months.
• Do not expose appliance to sunlight or
freezing temperature.
• Recommended temperature range: 39.2°F
(4°C)~104°F (40°C).
Runtime
• When in AUTO mode, the runtime is
approximately 40 minutes. When MAX power is
used, the runtime is approximately 10 minutes.
• Estimated runtime data was obtained by a
Tineco Laboratory using one battery and non-
motorized accessories.
Charging Time
• A full charge takes approximately 5.5 hours.
• Estimated data was obtained by a Tineco
Laboratory using ambient temperatures
between 39.2°F (4°C) to 104°F (40°C).
20