Descargar Imprimir esta página

Signs And Symbols; Product Information; Manufacturer´s Data; Use According To Intended Purpose - Mafell F80 Instrucciones De Montaje

Ocultar thumbs Ver también para F80:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
Table of Contents
1
Signs and symbols ........................................................................................................... 6
2
Product information .......................................................................................................... 6
2.1
Manufacturer´s data ......................................................................................................... 6
3
Use according to intended purpose .................................................................................. 6
4
Connecting piece F-VS (optional accessories) ................................................................ 7
5
Sliding bevel F-WA (optional accessories) ....................................................................... 7
6
Optional accessories ........................................................................................................ 8
7
Spare parts ....................................................................................................................... 8
1

Signs and symbols

2

Product information

Model
F80
Item number
204380

2.1 Manufacturer´s data

MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218, e-mail: mafell@mafell.de
3

Use according to intended purpose

For machine types with a groove:
The groove is suitable for vertical cuts and bevel cuts.
For machine types with two grooves:
- Outer guide groove for bevel cuts
- Inner guide groove for vertical cuts 0° only
Note! If bevel cuts are performed, damage to the guide rail caused by cuts
Note! Damage to the new splinter guard due to blunt saw blade
The mounted splinter guard must be cut to size to fit the saw before the first cut. To do so, the entire length of
the rail is placed onto a level surface (board or similar). Set cutting depth to approx. 3 mm and angle scale to 0.
Turn on portable circular saw and push evenly forward in the direction of the cut. The resulting cut edge on the
splinter guard serves as tracing edge for straight cuts and bevel cuts.
This symbol indicates tips for the user and other useful information.
F110
204381
F160
204365
-6-
F210
F310
204382
204383
English

Publicidad

loading

Este manual también es adecuado para:

F110F160F210F310