Know Your Pressure Washer - Speed Clean 2000PSI Instrucciones De Uso

Briggs & Stratton Generac Generator Discount Parts Call 606-678-9623 or 606-561-4983

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Air Filter
Throttle Control Lever
Primer Bulb
Pump equipped with Automatic
Cool Down System
Adjustable Nozzle (not shown) — Always attached to
nozzle extension. Adjustable nozzle allows you to adjust
spray pressure and spray pattern.
Air Filter — Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F.Warm
water will discharge from pump onto ground.This system
prevents internal pump damage.
Chemical Injection Siphon/Filter (not shown) — Use
to siphon detergent or other pressure washer chemicals
into the low pressure stream.
High Pressure Hose (not shown) — Connect one end
to water pump and the other end to spray gun.
High Pressure Outlet — Connection for high pressure
hose.
SpeedClean™ 2000 PSI Pressure Washer
Recoil Starter
www.mymowerparts.com
Data Tag (not shown, near rear of base plate) –
Provides model and serial number of pressure washer.
Please have these readily available if calling for assistance.
Oil Fill/Dipstick — Check and fill with oil here.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun (not shown) — Controls the application of
water onto cleaning surface with trigger device. Includes
trigger lock.
Throttle Control Lever — Sets engine in starting mode
for recoil starter and stops a running engine.
Water Inlet — Connection for garden hose.
5
Oil Fill/Dipstick
Water Inlet
High Pressure Outlet