Cleaning And Maintenance - Iseki PE1500 Manual Del Usuario

PE1500

5. CLEANING AND MAINTENANCE

TANK AND PIPES
Clean the instrument and its pipes after each use, with clean water. Empty
the tank complete. Never leave the sprayer phytosanitary products stored in
the tank, pipes or pump.
FILTERS
This machine has the following filters:
• Tank filling filter (Ref. 1447PE).
• Suction filter (Ref. 14062PE). It is located on the side of the tank and can
be removed for cleaning. After cleaning, it should be reassembled in its
housing in the same original shape and position.
• Handle filter (Ref. 1453PE), located inside the handle.
• Herbicide nozzle filter, next to the spraying nozzle.
• The correct maintenance of the filters is the best guarantee for the proper
functioning of your backpack. Clean these filters periodically (every work
day) and replace them if damage.
NOZZLES
The electric sprayer is supplied with quality nozzles. The performance of
this equipment may be reduced if a nozzle with excessive wear or a non
recommended nozzle are used. Replace the nozzle when it present signs
of deterioration.
RECHARGE AND BATTERY MAINTENANCE
The battery is a very sensitive subjected to wear, to
lengthen its life is important to read the charging and
maintenance recommendations.
To recharge the batteries, extract the battery from its
housing by pressing the release lever and moving the
battery up (Ref. 13943PE) (see fig. 1), then connect the
charger (Ref. 13980PE) to the mains through its mains
connection. 100 / 240vAC.
Next, you must connect the 21v plug. DC to the battery
socket (Ref. 13943PE) located on the rear side, then
the green battery LED will start to blink, indicating that
the recharging process has begun.
— 20 —
www.iseki.fr
Figure 1