I-Press App; Training And Qualifications; Pre-Operation Inspection - Greenlee ES20LXR Manual De Instrucciones

I-Press App

This tool has wireless capability that allows it to
communicate with the Greenlee i-press App on your
smart device.
1. Install the "i-press Klauke Software Solutions" app
from the App Store or Google Play. Open the app on
your smart device and select the "Greenlee" option.
2. Switch on the wireless function on your smart
device and activate the tool to establish a
connection.
The app will allow you to create projects, personalize
your tool, display tool pressure readings, battery charge,
the last service date, and more.
Instructions how to use the app are shown in the i-press
app itself; alternately, request MA6864 brochure from
any Greenlee distributor.
If the tool is paired with the remote, it will not connect
with the app.
i—Press is a registered trademark of Gustav Klauke
GmbH
App Store is a registered trademark of Apple Inc.
Google Play is a registered trademark of GOOGLE INC.
Training & Qualifications
This product is designed for use by professionals
trained for working on and around high voltage electrical
equipment. If you are not trained in the work methods
required for safe operation, do not use this product.
Always follow all training and proper live electricity
job site safety precautions outlined by your industry,
government, and employer. See also OSHA standard for
electric power generation, transmission and distribution
(29 CFR 1910.269) and NEC 70E: Standard for Electrical
Safety in the Workplace.
When required, such as for installation, removal and
repair of lines energized at more than 600V, ensure at
least a second trained and qualified person is present at
appropriate distance.
52093315 REV 0

Pre-Operation Inspection

• Remove battery before touching the cutting
head or attaching/removing the hot stick
adapter. Your fingers or hands can be crushed,
fractured, or amputated if they become caught in
the tool head or between the tool head and other
objects.
• Before use, inspect the tool and correct any
problems before using to reduce the risk of
injury and prevent product damage. If during
inspection, hydraulic oil has leaked from the tool or
damage to tool is observed or suspected, do not
use the tool. Large forces are generated during use
that can break or throw parts and cause injury.
1. Remove battery.
2. Clean any oil, grease or dirt from the tool body and
head, including handles and controls. A clean tool
aids inspection.
3. Inspect for wear and damage, such as cracks,
gouges, or chips in tool housing. Do not use if any
parts are worn, corroded, rusted, or cracked.
4. Check the blades for any cracks, gouges, or chips
or significant wear. Replace blades that are dull or
chipped before operating for a clean cut. Do not
sharpen blades, send in for service.
5. Inspect for leaking hydraulic oil. Do not use if lead is
detected, send in for service.
6. Test the rotation of the head assembly, the head
should be free to rotate almost one full turn (330˚). If
head rotates past a full turn, send in for service.
7. Check the hot stick adapter damage and the
presence of wing nut. Replace if adapter is damaged
or wing nut is missing.
8. Check for proper assembly and completeness, do
not use if there are missing or misaligned parts.
9. Check for the presence and condition of decals.
10. Inspect and maintain any other equipment being
used per its' instructions and is functioning properly.
If any issues are found, do not use this tool until
corrected.
© 2022 Greenlee Tools, Inc.
ES20LXR
11