Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN - User's Guide

How it works

The device works with AC adapter (included) and 3 "D" size batteries (not included) as an optional back up power.
If you do not want to use the AC adapter, you can install batteries in the base unit: remove battery covers located on bottom
of the base unit and install 3 "D" size alkaline batteries (not included) into battery compartments observing the proper polarity
(+/-). Put the battery cover back into place. The "Low Battery" indicator light will flash when the batteries are low.
To turn the dispenser on and off, press the ON / OFF switch located on the bottom of the base unit.
On/off switch
USB cable
Adapter
Fill the compartments bowl
Open the lid
Pull here to open the lid
Vertically lift up
According to the position of the picture
Fill the compartments bowl
Fill each tray section with up to 320 ml of dry or semi-moist food. Level the food before closing the lid. Do not overfill the
feeder, as this may cause the lid to jam.
Lock the lid
Find the
A-B
direction
Insert two gaps
Press the lid down
5

Publicidad

loading