Weekly Maintenance - Tennant READYSPACE 1610 Manual Del Operador Y Piezas

OPERATION
4. ReadySpace Cleaning: Remove the splash shroud
and inspect the rollers for wear. If the gap between
the two rollers is greater than 4mm (5/32") replace
the rollers (Figure 26). Always replace rollers as
a set.
Splash
Shroud
FIG. 26
5. Clean the machine housing with an all purpose
cleaner and damp cloth (Figure 27).
FOR SAFETY: When servicing machine, do not
power spray or hose off machine. Electrical
malfunction may occur.
FIG. 27
6. Recharge the batteries (Figure 28). See
CHARGING BATTERIES.
NOTE: To prolong the battery life, ONLY recharge the
batteries after a total of 30 minutes of use or more.
FIG. 28
18
All manuals and user guides at all-guides.com

WEEKLY MAINTENANCE

(Every 10 Hours of Use)
1. Flip the ReadySpace rollers end-for-end every 10
GAP
Replace rollers
if gap is greater
than shown.
2. Remove any debris build--up from the underside of
3. Remove the front and rear roller vacuum shoe
4. Remove any entangled carpet fibers and debris
hours of use (Figure 29). The roller life is rated for
at least 100 hours of use under normal cleaning
conditions. If the gap between the two rollers is
greater than 4mm (5/32") replace the rollers.
FIG. 29
the scrub head (Figure 30).
FIG. 30
covers and remove any debris (Figure 31).
FIG. 31
from the brushes (Figure 32). Replace brushes if
worn. To determine when to replace worn brushes
observe the brush pressure meter.
Tennant 1610 (07- -05)