Publicidad
Idiomas disponibles
Idiomas disponibles
Additional safety information
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products or
u
in POWER FOR ALL system products. This is the only
way in which you can protect the battery against danger-
ous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
The application tool may jam during drilling. Make
u
sure you have a stable footing and hold the power tool
firmly with both hands. Otherwise you could lose con-
trol of the power tool.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Bosch Power Tools
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
SDS plus drill chuck
(2)
SDS plus tool holder
(3)
Dust protection cap
(4)
Locking sleeve
(5)
Button for depth stop adjustment
(6)
Impact/mode selector switch
(7)
Handle (insulated gripping surface)
(8)
Rotational direction switch
(9)
On/off switch
(10)
Battery charge indicator
(11)
Rechargeable battery
(12)
Worklight
(13)
Battery release button
(14)
Wing bolt of auxiliary handle
(15)
Auxiliary handle (insulated gripping surface)
(16)
Depth stop
a)
(17)
Keyed chuck
(18)
SDS plus shank for drill chuck
(19)
Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
A)
Rated speed
A)
Impact rate
Impact energy per stroke ac-
cording to EPTA-Proced-
ure 05:2016
Tool holder
Max. drilling diameter
– Concrete
– Steel
– Wood
English | 15
a)
a)
a)
a)
UniversalHammer
18V
3 603 JD6 0..
V=
18
-1
min
0–2000
-1
min
0–5400
J
2.0
SDS plus
mm
16
mm
13
mm
25
1 609 92A 6K0 | (20.05.2022)
Publicidad
