Publicidad
Idiomas disponibles
Idiomas disponibles
EN
• Do not use the appliance on soft fabrics such as mohair and wool, or on high-class fabric, in
order to prevent fabric damage.
• Always clean the lint remover after use.
User manual
PACKAGE CONTENTS
• 1 × Smoover Portable Lint Remover
• 1 × USB Charging Cable
• 1 × Quick Guide
PRODUCT DESCRIPTION: SEE PAGE 2
1. Lanyard
2. Top cover
3. Lint compartment window
4. Bottom cover
5. Lint mesh
6. Power/speed/light button
7. LED indicator
8. Micro-USB port
9. Cutting blade
10. Battery/assembly compartment
11. Lint compartment
Maintenance and cleaning
• Switch the product off and wait for it to come to a complete stop before cleaning.
• When cleaning the components, do not use aggressive or abrasive cleaning agents or ma-
terials such as scouring milk or steel wool. They can damage the surface of the appliance!
• Protect the device from water drops and sprays.
• Use only a clean, dry cloth for cleaning, and never any corrosive liquids.
• Use a slightly damp cloth and a mild cleaning agent to remove any stubborn dirt.
• Make sure no moisture enters the product while cleaning, to prevent damage to the prod-
uct and related repairs.
Storage
• Make sure the appliance has cooled down completely before storing it away.
• When no longer using the appliance, store it in a dry environment, away from dust and
direct sunlight.
• If the appliance is not going to be used for a long period of time, you should recharge it on
a regular basis. This helps maintain battery performance.
• It is recommended to store the appliance in the original packaging.
6
INSTRUCTIONS
Charging
Before use, make sure the lint remover is fully charged. Charge the appliance by connecting
it to a USB port using the included charging cable. The LED indicator shows the charging
status.
LED INDICATOR STATUS
Light off
White light
Red light flashing quickly
Red light flashing slowly
Red light always on
Before use
Before using the lint remover, make sure the clothes are clean and properly laid out. Make
sure to be extra careful when removing lint around buttons, zippers, seams, decorations,
prints, and when handling thin or easily torn fabric.
NOTE: Do not use this product on clothes such as down jackets, silk stockings, or sweaters
with a nap length exceeding 5 mm. Their fabric can be easily damaged.
Operation
• Spread the garment out on a flat surface. Particularly the parts with more lint should be
properly spread out.
• Turn the lint remover on by short-pressing the button. According to the type of lint you
want to remove, short-press it a second time to change the speed.
• If you want, turn the light on by long-pressing the button.
• Without exerting too much downward pressure, move the lint remover back and forth over
the garment's surface to remove the lint.
• When you're done, short-press the button to turn the lint remover off. If you used the light
function, long-press the button to turn it off again.
2 speeds
• High Speed: When turned on, the lint remover will start in high-speed mode. Use this
speed for removing rougher, larger lint.
• Low Speed: When you press the button again, the lint remover will change to low-speed
mode. Use this speed for removing softer, smaller lint.
MEANING
Turned off or light switched on
Turned on
Low on power, please charge
Charging
Fully charged
EN
EN
7
7
Publicidad
