Installing And Replacing Blades; Removing The Battery - PROZIS SMOOVER Manual Del Usuario

EN
Cleaning out the lint compartment
To open the lint compartment, twist the top counterclockwise (fig. 1) and remove it. You can
then remove the lint inside (fig. 2). Make sure to empty the storage compartment before it is
80% full.

Installing and replacing blades

NOTE:
• Always make sure the power is off before opening the appliance to change the blade.
• To avoid scratches, do not touch the metal part of the blade with your fingers.
1. Remove the blade by twisting the bottom cover clockwise (fig. 3) until it is unscrewed
completely. Hold the plastic edge of the blade with your fingers or a pair of tweezers, and
pull it down slightly to take out the blade (fig. 4).
8
2. Install the blade by holding its plastic edge with your fingers or a pair of tweezers. Align
the hole on the back of the blade with the cylinder and press the blade into position (fig.
5). Then put the bottom cover back and screw it back on (fig. 6).

Removing the battery

Before discarding the lint remover at the end of its lifetime, the battery needs to be removed.
Do this as follows:
1. Make sure the power is off.
2. Remove the top cover of the product (fig. 7), and use a flat object, such as a small flat-
blade screwdriver, to pry open the battery cover (fig. 8).
EN
9