ARCA AV40 Manual página 27

BD/DVD Device Mode
The Device Mode button configures the remote to
control the functions of Arcam Blu-ray Disc and DVD players,
although this can be changed. Pressing this button also
selects as the source.
BD
Toggles power between standby and on.
2
Open/close disc tray.
1
Searches for and plays the track corresponding
0...9
to the key pressed when playing a CD.
DISP Cycles through the front panel display's
brightness options.
Cycles through the repeat options (track, disc,
MODE
etc.).
Fast rewind.
7
Fast forward.
8
9 Press and release to skip back to the beginning
of the current/previous track.
Press and release to skip forwards to the
:
beginning of the next track.
Stop playback of a BD or DVD.
Pause and playback of the current track.
4;
Start recording (on products that have this
feature).
Disc menu.
MENU
Activates BD/DVD player menu, if available.
POP UP
Navigate setup and BD/DVD programme
selection menus.
selects the highlighted file or enters the
OK
highlighted menu on the screen – equivalent
to 'Enter' or 'Select' on some remote controls.
' Up
< Left
> Right
, Down
+ ' Power on from Standby
BD
+ , Standby from Power on
BD
+ > changes the picture resolution (for BD,
BD
only on the Home screen).
Returns navigation to the top level of the menu
('Home').
AUDIO Changes audio decode format (Dolby Digital,
DTS, etc.).
Resets remote to mode.
AMP
AMP
RED button for BD
RED
button for BD
GREEN GREEN
button for BD
YELLOW YELLOW
button for BD.
BLUE
BLUE
EN-25
AV Device Mode
The Device Mode button configures the remote to
control the functions of a television or other display device.
You will need to configure this Device Mode to work with
your equipment. Pressing this button also selects as the
source.
Toggles power between standby and on.
2
(Some TVs require you to use a number key to
turn them on).
Functions as original remote number key –
0...9
usually for channel selection.
Display INFO or OSD (On Screen Display) function,
DISP
if available.
AV; this function is TV specific.
MODE
Channel down.
9
Channel up.
:
INFO Displays picture information; this function is TV
specific.
Guide.
POP UP
Navigate setup and programme selection menus.
confirms a selection (equivalent to 'Enter' or
OK
'Select' on some remotes).
Returns navigation to the top level of the menu
('Home').
Resets remote to AMP mode.
AMP
key for Text TV
RED RED
key for Text TV
GREEN
GREEN
key for Text TV
YELLOW YELLOW
BLUE key for Text TV.
BLUE
UHD
UHD Device Mode
The Device Mode button selects as the source.
The UHD page allows code learning from a dedicated UHD
remote – see "Customising the Remote" on page EN-22
EN