User Settings: Admin Not Enabled - Kingston Technology IronKey Locker Plus 50 Instrucciones

LP50 Settings

User Settings: Admin Not Enabled

As mentioned previously on Page 12, initializing the LP50 without enabling 'Admin and User' passwords will configure
the drive up in a Single Password, Single User setup. This configuration does not have access to any Admin options
or features. This configuration will have access to the following LP50 Settings:
Password:
Allows you to change your own User
password and/or hint. (Figure 8.8)
Contact Info:
Allows you to add/view/change your
contact information. (Figure 8.9)
Language:
Allows you to change your current
language selection. (Figure 8.10)
Figure 8.8- Password Options (User-Only Mode)
Figure 8.9- Contact Information (User-Only Mode)
Figure 8.10- Language Settings (User-Only Mode)
26