Publicidad
Idiomas disponibles
Idiomas disponibles
Verify Operation (cont.)
Automatic 24-hour cleaning flush operation: After 24-hours of
non-use, the valve produces a cleaning flush to keep the trapway
fresh.
Check Operation
Perform the following checks in order to verify that the exposed
electronic valve operates correctly:
Approach the fixture and stand in front of the sensor.
After 10 seconds, step away from the fixture. After a short delay,
the valve should flush.
Confirm that the flush ends.
After 24 hours of non-use, verify that the programmed 24-hour
cleaning flush occurs.
NOTE: If exposed electronic valve operates correctly, refer to the
"Troubleshooting" section in the Maintenance Guide.
Kohler Co.
7
1140767-2-A
Publicidad
