Publicidad
Idiomas disponibles
Idiomas disponibles
Finished
Wall
Adapter
2" (5.1 cm) Min
3-1/2"
(8.9 cm) Max
1/2"
Piping
2. Install the Yoke
NOTE: The yoke has two-sided pipe adapters that can be reversed
for use with either 1/2" pipe or copper tubing.
Connect the water supply lines to the supply yoke so the
installed water supplies will be between 2" (2.5 cm) and 3-1/2"
(8.9 cm) from the finished wall.
3. Install the Valve - Ceiling Installations
IMPORTANT! Perform these steps for ceiling installations only.
Remove the aspirator, plaster guards, and valve units from the
yoke.
Turn the yoke upside down.
Install the aspirator into the bath outlet of the yoke.
Reinstall the valve units, being sure to install the gray-stemmed
valve on the right side. The "D" on the valve must point
downward.
Reinstall the plaster guards.
113725-2-AB
All manuals and user guides at all-guides.com
Valve Stem
Off Position
Bath
Aspirator
Outlet
Yoke
Plaster
Guard
4
Kohler Co.
Publicidad
