Publicidad
Idiomas disponibles
Idiomas disponibles
If the snow thrower will not be used for 30 days or longer, or if it is the end of the snow season when the last possibility of snow is gone, the
equipment needs to be stored properly. Follow storage instructions below to ensure top performance from the snow thrower for many more years.
PREPARING THE ENGINE
Engines stored over 30 days need to be drained of fuel to prevent
deterioration and gum from forming in the fuel system or on essential
carburetor parts. If the gasoline in your engine deteriorates during
storage, you may need to have the carburetor, and other fuel system
components, serviced or replaced.
1.
Remove all fuel from the tank by running the engine until it stops.
2.
Change the engine oil.
3.
Remove the spark plug and pour approximately 1 oz. (30 ml) of
clean engine oil into the cylinder. Pull the recoil starter several
times to distribute the oil, and reinstall the spark plug.
4.
Clean the exterior of the engine by wiping dirt and debris from the
following areas:
•
Cooling Fins
•
Air Intake Screen or Recoil Starter/Flywheel Guard Areas
•
Spark Plug Connection
•
Levers
•
Linkage Area
•
Guards
•
Carburetor
•
Engine Head
CAUTION
Do not spray the engine with water to clean it because the water
could contaminate the fuel. Using a garden hose or pressure washing
equipment can also force water into the muffler opening. Water that
passes through the muffler can enter the engine cylinder and cause
damage.
5.
Store in a clean, dry and well ventilated area away from any
appliance that operates with a flame or pilot light, such as a
furnace, water heater or clothes dryer. Avoid any area with a spark
producing electric motor, or where power tools are operated.
WARNING
Never store snow thrower with fuel in tank indoors or in poorly venti-
lated areas, where fuel fumes may reach an open flame, spark or pilot
light as on a furnace, water heater, clothes dryer or gas appliance.
6.
If possible, avoid storage areas with high humidity.
7.
Keep the engine level in storage. Tilting the engine can cause
fuel or oil leakage.
OFF-SEASON STORAGE
PREPARING SNOW THROWER
If the snow thrower will not be used for 30 days or longer, follow the
instructions below.
1.
2.
3.
17
Store the equipment in a clean, dry area.
Wipe down the snow thrower with a rag and remove any dirt or
debris.
If storing the snow thrower in an unventilated area, rustproof the
metal parts of the machine with a light oil or silicone coating.
Publicidad
Solución de problemas
