Select The Fuel Source (Propane/Lpg) - iPower GXS4300iDC Manual Del Propietário

2. Add gasoline to the fuel tank.
3. Turn the starting dial switch to the START
position.
Note: For restarting a warm engine, turn the starting
dial switch directly to the "RUN"
4. Pull recoil starter slowly until resistance is felt,
then pull rapidly.
5. Turn the starting dial switch to the RUN
position.

Select the Fuel Source (Propane/LPG)

1. Connect the LPG gas hose to the propane fuel
2. Fully open the Propane/LPG cylinder knob.
position.
3. Turn the starting dial switch to the START
4. Pull recoil starter twice.
Page 20
source. Connect the small end of the LPG gas
hose to the LPG inlet on generator and then
snug with a wrench to prevent leakage.
position.
Note: For restarting a warm engine, turn the starting
dial switch directly to the "RUN" position.
Pull twice