Suntec Wellness KLIMATRONIC DryFix 20 MAX Manual Del Usuario página 10

COMPONENTS (picture 1)
1 light indication
2 rollers
3 control panel
4 air outlet
5 water tank
CONTROL PANEL (picture 2)
STAND-BY: Press the button to turn the unit on or off
LOCK: Child Lock. Keep the button pressed to lock or unlock all the keys.
MODE: Please press the button to select between auto dehumidification and manual
dehumidification.
TIMER: You can determine the switch-on or switch-off time by entering the desired number
of hours (0-12) with the key. If you select "00", the timer is deactivated.
LOCK: Child lock. Please press and hold the button to unlock/lock all buttons.
SPEED:
Please press this key to select the desired fan speed.
SLEEP / Please press this button to switch on the sleep mode or hold the button for 3
RESET: seconds to reset the filter change indicator.
Press these buttons to change the timer or humidity level settings.
OPERATION INSTRUCTIONS
Attention: These functions are only available when the room temperature is between 5°C-35°C and the
humidity is between 20%-90%.
Switching the device on/off
- Please plug in the power plug of the dehumidifier.
- Please press the STAND-BY button to turn on the device.
- The unit will start with high fan speed and humidity level setting of 50%.
- Please press the STAND-BY button again to deactivate the unit. The fan will continue to run for
30 seconds.
Timer
Power off time:
- Please press the TIMER button while the unit is running to set the off time.
- The time can be set by the hour (0-12h) with the up / down "
Switch-on time:
- Please press the TIMER key while the device is switched off to determine the switch-on time.
- The time can be set by the hour (0-12h) with the up / down keys "
Deactivate timer:
- Please press the up / down button repeatedly until '00' is shown on the display.
Continuous dehumidification - Auto dehumidification
- Please press the MODE button to select between continuous and auto dehumidification mode.
- In continuous dehumidification mode, the unit is always set to high ventilation speed and 20%
humidity. This cannot be changed in this mode.
activated carbon & dust filter
6
drainage opening
7
handle
8
air inlet
9
water tank
10
" buttons.
".