VENTE-UNIQUE LERY Instrucciones De Montaje página 27

4.
Note:Make sure the position of
the projection on (G2)towards
inside.
F1/S2
Insert the 2 pieces of (G2). Top slide into the Sliding channel (8). See
blowup. Assemble Door bar ( 6) between front wall panel (P1) and
(P2) .And then place the sliding channel (7) and (8) on top of front wall
panels from inside.
Line up the holes with wall panel. Use (F1) screws with washers to fix．
See the position in figures below .
Note:sliding channel (7) and(8)are nit have holes. It's soft,The screws
easy can fix.
7