Ruby RFC-2000 Manual De Instrucciones página 24

6. POWER BUTTON: Turn the heater off.
7. UP BUTTON: Increase timer and level.
8. DOWN BUTTON: Decrease timer and level.
9. LEVEL BUTTON: Use to adjust the heat levels(L1-L2). Press the Level button then
use the up and down buttons(buttons 2 and 3) to increase or decrease the heating
level.
10. TIMER BUTTON: To set the timer from 0H-24H, which is the number of hours it will run.
0H will display and then adjust to the number of hours you would like to set, using the
up and down buttons(2 and 3).
Noted: All SUNDEAR MOON heaters and their remote controls have the same
frequency, so it is possible to control several heaters with just one remote.
PUSH BUTTON: on the right end of heater, it could be manual operated without
remote control.
Inserting Batteries
Insert 2 AAA/ Alkaline type batteries into your remote control
1. Flip the backside of your remote control and pull out battery cover. Insert the batteries
in accordance with the instructions and polarity the batteries.
2. Change the batteries in the same way depicted above.
NOTICE:
1. Replace the old batteries with the same type batteries. Otherwise, your heater may not
function well.
2. Pull out the batteries in case of long terms of disuse to prevent leakage which may
impair your remote control.
3. Do not allow water or liquid to get into the remote control.
Caution:
When the appliance is not operated for a long period of time, cleaning or maintenance is
conducted or when the location of the heater is changed, the heater should be turned to
OFF and unplugged from the electrical connection.
Periodic inspection and removal of dirt and contaminants will ensure that equipment can
be operated safely.
24