Led 1: ON
Led 2: ON
4 LED
Led 3: ON
Led 4: ON
Led 5: OFF
Led 6: OFF
Led 1: ON
Led 2: ON
6 LED
Led 3: ON
Led 4: ON
Led 5: ON
Led 6: ON
5.3. KEYPAD LOCK
By pressing the
panel keypad. If any key is pressed while the panel is locked, all the LEDs will flash twice.
For safety reasons, the on/off button
the product on or off when the panel locked, press and hold the button
5.4. MAX POWER MODE
The MAX POWER mode activates the towel rail heating element to maximum power
continuously regardless of the sensor reading. To activate this function from the control
panel, press the button
switched off.
Pressing
once will activate this mode for 15 minutes. If you press it again within the
next two seconds, the next period (30 minutes) will be activated. Consecutive presses will
activate the following periods as shown in the table below:
14
24ºC
30ºC
and
keys together for 3 seconds, you can lock/unlock the control
. You can also activate this mode, even when the product is
5 LED
will respond even if the panel is locked. To switch
Led 1: ON
Led 2: ON
Led 3: ON
27ºC
Led 4: ON
Led 5: ON
Led 6: OFF
for 3 seconds.