American Standard 624B Serie Manual Del Propietário página 7

7
INSTALL POWER SUPPLY AND MAKE ELECTRICAL CONNECTIONS
Ensure that the line power to bathroom
is OFF prior to making connections.
1. Connect Black and White power connections to AC
Transformer (1). Mount AC TRANSFORMER (1) onto
ELECTRICAL BOX (2).
2. Connect the 10' EXTENSION CABLE to the
CONVERTER (7).
B H J
8
INSTALL ELECTRICAL BOX, CONDUIT, ESCUTCHEON & SENSOR CABLE
REMOTE INSTALLATION FOR POWER SUPPLY
1. Drill a 2" diameter hole in the finished wall for the CONDUIT (2).
2. Pull 27" EXTENSION CABLE (3) through CONDUIT (2).
3. Slide ESCUTCHEON (1) onto CONDUIT (2).
4. Connect the 10' EXTENSION CABLE (4) to the 27" EXTENSION CABLE (3).
Secure this connection with the CONNECTOR LOCKING DEVICE (5) and place inside electrical box.
5. Slide ESCUTCHEON (1) tight against finished wall and secure by tightening SET SCREW (6).
C
Fig. 9
NOTE: AC Transformer must be installed on the outside of
the Electrical Box.
Finished Wall
4
7
5
10'
1
3
2
6
(51mm) 2" DIA.
HOLE FOR
CONDUIT
10' EXTENSION
2
BLACK & WHITE
POWER
CONNECTIONS
SMALL END
8
86mm
(3-3/8")
SUPPLY
(3/4" NPT)
7
1