Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY PROCEDURES
Be sure to place the cooker on a flat surface, cardboard, cloth, or some other material to avoid
damaging or scratching the paint.
1. Lower the lower wall in the direction of the
2. Lift the upper wall as shown in the reference
arrow.
picture.
3. Open the wall on the left-hand side as indicated by the arrow. 4. Open the wall on the right-hand side as indicated by
the arrow.
5. The left and right (upper) sides must be connected using
the two wing screws. The left and right (lower) sides are
6. Remove the holder from the canister and mould it
connected to the lower base using 4 M4 screws.
into the correct shape before fitting it.
22
Publicidad
