Publicidad
Idiomas disponibles
Idiomas disponibles
6
Tips for fault diagnostics
Symptom
Device does not
discharge any oil.
Device is
producing too
little oil.
7
Specifications
Type
Power requirements
Engine performance
Protection rating
Security of the supply line
max. delivery pressure
max. delivery rate
at open discharge without accessories
Volume level
Dimensions L x W x H
Weight
Unit without accessories
Fluid media:
Diesel, light fuel oil
Fluids including Hazard Class A3 can be supported.
Viscous media of Hazard Classes A1 and A2 can not be supported.
If media not listed here is used, please clarify this with our technical department.
8
Disposal
After termination of use the device is to be disposed of in an environmentally
friendly manner in accordance with applicable statutory provisions.
Oil-tainted parts do not belong in the dustbin!
The applicable regulations for the registration, installation and operation of
equipment for handling of substances hazardous to water are to be strictly observed by the
operator (such as, e.g., Federal Water Act, German Ordinance on Exposure to Substances
Hazardous to Waters and Technical Rules and Regulations for Flammable Liquids).
14
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:+49(0)6108-906-0 / Fax:+49(0)6108-906-120
GmbH & Co. KG
MATO
Possible cause
The container is empty.
The oil supply has been interrupted.
Faulty pump.
Suction screen is clogged.
Filter in the handle of the nozzle is
clogged.
Rectification
Check the level of the container.
Prime the pump, check the supply line.
Replace pump.
Clean suction screen.
Clean filter.
EP 55
220/230V
50Hz – 4A
0.46 KW
IP 55
10A
2 bar
55 l/min.
ca. 67
dB(A)
240x120x190
7 kg
Operating manual
EP55 / EP140
EP 140
220/230V
50Hz - 5A
0.5 KW
IP 55
10A
2,8 bar
80 l/min.
230x180x190
8,6 kg
Publicidad
