Publicidad
Idiomas disponibles
Idiomas disponibles
APPLICATIONS
CHRYSLER
200
2011-up
300
2008-2010
Aspen
2008-2009
Sebring
2007-2010
Town and Country
2008-up
DODGE
Avenger
2008-up
Caliber
2009-2012
Challenger
2009-up
Charger
2008-2010
Dakota
2008-2011
Durango
2008-2013
Grand Caravan
2008-up
Journey
2009-2010
Magnum
2008-2009
Nitro
2007-2011
Ram 1500
Ram 2500/3500
2010-2011
2
JEEP
Commander
Compass
Grand Cherokee
Liberty
Patriot
Wrangler
MITSUBISHI
Raider
Ram
1500/2500/3500
C/V Tradesman
Chassis Cab 3500/4500/5500
2009
CONNECTIONS TO BE MADE
From the 16-pin harness
2008-2010
• Connect the (2) Red wires to the ignition/accessory wire of the aftermarket radio.
2009-up
• Connect the Orange/White wire to the illumination wire of the aftermarket radio. If the
2008-2013
aftermarket radio does not have an illumination wire, tape off the Orange/White wire.
2008-2012
• Connect the Blue/White wire to the amp turn on wire of the aftermarket radio.
2009-up
2007-up
• Tape up the Brown wire. It will not be used in this application.
For vehicles with built-in navigation (only), make the following connections:
2008-2009
• Connect the Light Green wire to the parking brake wire of the aftermarket navigation radio.
• Connect the Blue/Pink wire to the VSS or speed sense wire of the aftermarket navigation radio.
2012
• Connect the Green/Purple wire to the reverse wire of the aftermarket navigation radio.
2012-up
2012
Only make the following connections if the vehicle is amplified:
• Connect the White wire to the left front positive speaker output of the aftermarket radio.
• Connect the White/Black wire to the left front negative speaker output of the aftermarket radio.
• Connect the Gray wire to the right front positive speaker output of the aftermarket radio.
• Connect the Gray/Black wire to the right front negative speaker output of the aftermarket radio.
• Connect the Green wire to the radio's left rear positive speaker output.
• Connect the Green/Black wire to the radio's left rear negative speaker output.
• Connect the Purple wire to the radio's right rear positive speaker output.
• Connect the Purple/Black wire to the radio's right rear negative speaker output.
Continued on next page
Publicidad
