Maintenance And Cleaning; Technical Assistance - VITO PRO POWER VIBE1050A Manual De Instrucciones

▪
The backlash occurs due to an incorrect use of the power tool
or due to a not proper working procedure which can cause
serious injuries to the user. To avoid the backlash, the
following precautions must be considered:
- Always use the auxiliary handle to have as much control as
possible over the backlash forces or reaction torques while
operating the equipment;
- Place and keep the rotating accessory in the right position
and well tightened;
- Do not place yourself in the area where the power tool will
move in case of a backlash;
▪ Never place your hands near the rotating accessory once it
may revert over them. Keep your hands away from the
rotating accessories;
▪ When the rotating accessory gets stuck, switch off the power
tool. In case of losing control, unplug the power cord
immediately;
▪
To avoid displacements or projections use a fixing tool or a
bench vice to ensure a safe performance. Place/maintain the
object in a correct and stable position;
▪
Never leave the equipment before the rotating accessory is
completely stopped. The rotating accessory may touch the
surface, making you lose the control over the machine;
▪
Make sure that the ventilation grids are not blocked while
operating the machine. Do not place any objects over the
grids;
▪
The drills chucks and the power tool itself may get hot during
the work. Any accidental contact may burn;
▪
Make sure that you don't damage the electrical circuits, gas
and water pipes when operating the equipment. Any of
these damages may cause fires, explosions, electrical shocks
or several expensive losses;
▪
Avoid using the machine on surfaces coated with paints
containing lead or other materials harmful to health. Any
contact or inhalation of dust may cause allergic reactions and
/ or breathing diseases. Wear a mask and work with a dust
extraction device if the machine allows it;
▪
Materials containing asbestos cannot be worked. Asbestos is
carcinogenic.
28

Maintenance and cleaning

Before performing cleaning,
maintenance works, the power cord must be unplugged.
Replace worn out or damaged parts immediately, so that the
machine is always in a safe operating condition.
Cleaning:
The power tool must be carefully cleaned after each use.
Do not use aggressive cleaning products. These products may
damage plastics and metals, compromising the safe operation
of the machine.
Maintenance:
Only maintenance works described in this instruction manual
may be carried out; all other works must be performed by an
official dealer.
Keep all nuts and screws well tightened in order to ensure a safe
operation.
If any components or safety devices are removed for
maintenance works, they must be repositioned immediately.
Use only VITO-approved tools for this machine or technically
identical parts. Not doing so may result in personal injuries or
damages to the machine. In case of doubt, you should contact
an official dealer.

Technical assistance

Your impact drill with hammer mode should only be serviced by
the manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with original
parts sourced directly from the manufacturer.
adjusting, repairing and