Descargar Imprimir esta página

Using Your Ceramic Hob; Control Panel - Jocel JP2EV010148 Manual De Instruciones

Placa vitrocerámica

Publicidad

Idiomas disponibles

Idiomas disponibles

USING YOUR CERAMIC HOB

USING THE TOUCH CONTROLS
The controls respond to touch, so you don't need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth) covering
them. Even a thin film of water may make the controls difficult to operate.

Control Panel

1. Cooking zone selecting
2. Timer Function
3. Power or Timer regulating controls
4. ON/OFF control
5. Key lock control
TO START COOKING
1. Touch the ON/OFF
After power on, the buzzer beeps once, all displays show " – " or " – – ", indicating that the induction hob has
entered the state of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
control.
-42-

Publicidad

loading