Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
What's in the Box
Make sure all the following items are
included in the packaging. If any item
is damaged or missing, contact your
dealer.
●
Microwave oven body x 1
●
Glass tray x 1
●
Glass tray roller ring x 1
●
User manual x 1
●
Warranty manual x 1
Before Installation
1.
Make sure that all the packing
materials are removed from the oven
cavity.
2. Check the oven for any damage,
such as misaligned or bent door,
damaged door seals and sealing
surface, broken or loose door hinges
and latches and dents inside the
cavity or on the door. If there is
any damage, do not operate the
oven and contact qualified service
personnel.
3. This microwave oven must be
placed on a flat, stable surface to
hold its weight and the heaviest food
likely to be cooked in the oven.
4. Do not place the oven where heat,
moisture, or high humidity are
generated, or near combustible
materials.
5. The oven must have sufficient
airflow. Do not cover or block any
openings on the oven. Do not
remove feet on which oven stands.
6. Do not operate the oven without
glass tray, roller support, and shaft in
their proper positions.
7.
Make sure that the power supply
CCD-0005771 Rev: 09-16-22
cord is good in condition and does
not run under the oven or over any
hot or sharp surface.
8. The electrical plug or the circuit
breaker must be accessible so that
it can be easily unplugged in an
emergency.
Microwave Oven
Installation
For built-in installations, you have
to use the upper and bottom ducts
provided with trim kit FMSN09A-
BL-TK/FMSN09A-SS-TK. Failure to
comply would lead to overheating of
the device.
Cabinet Preparation
1.
Select a suitable place that is not
susceptible to moisture.
2. Mark and cutout an opening in the
cabinet according to the dimensions
outlined in the table.
A
133/8" (340mm) Min.
B
20" (510mm) Min.
C
141/8" (359mm) Min.
- 9 -
WARNING
B
C
A
Publicidad
Solución de problemas
