Maintenance - Corradi PERGOTENDA 100 INCLINADO Manual Del Usuario

MAINTENANCE

INTRODUCTION
PERGOTENDA 100 is a unique product that offers the highest
quality and longest lifespan thanks to its construction and the
materials used. Routine maintenance is therefore minimal, thus
allowing users to keep the product perfectly functional and
attractive with just a few operations.
The few, simple rules to be followed are given below:
RUNNERS
Once a year in normal conditions of use, or once a month
when exposed to sea air, wash the inside of the runners with a
jet of water and if possible use a brush to remove all traces of
dirt and/or incrusted salt, as described in fig. 1.
Warning: the runners should never be lubricated under any
circumstances.
WOOD
Depending on the type of exposure (sea, air - smog, - etc.),
every 2 or 3 years wash the wood with water and a neutral
detergent, brushing it thoroughly in order to remove all the
residues of smog, dust and the like.
Once the wood is dry, apply one or two coats of the preferred
transparent or coloured water-based impregnating agent, in
order to renew the protection of the wood against UVA rays,
smog, etc., making it look as good as new.
38 of 119
CANVAS
Canvas maintenance is limited to cleaning.
To keep the part exposed to the elements as good as new,
wash it 2 or three times a year to avoid dust and smog from
being deposited and hardened by the sun.
In order to wash the canvas, spray water and neutral detergent
on it, leave the product to work for a few minutes and then use
a sponge to remove dirt without applying mechanical
pressure, repeat if necessary and rinse well.
WARNING:
THE RUNNERS SHOULD NEVER BE LUBRICATED
UNDER ANY CIRCUMSTANCES.
CORRADI S.P.A. - USER MANUAL - PERGOTENDA 100
HARDWARE
All of the hardware is manufactured in stainless steel (AISI 304)
and therefore does not require maintenance.
The appearance of micro-oxidation on the brackets does not
compromise their quality and duration and is to be considered
normal.
1
3 - 04.2011